The Solstice dock has ample room to set up some beach chairs and relax. Add a cooler and an umbrella to simulate a resort feel. Also used as perfect maintenance platform, the dock has Four D-rings that can be used to anchor the dock. Six or Eight handles around the dock help with boarding – just grab on. Tie your stand-up paddleboard or kayak to the side. When you’re ready to paddle, just step in from the dock – easy loading. Made with the same super tough drop-stich material iSUPs and inflatable boat floors use. The light weight, combined with the ability to deflate to a compact size, make the dock easy to transport to your fun water destinations.

Features:

• Creates a floating dock for relaxation, drying off and holding gear wherever you want
• Tie stand-up paddleboards or kayaks to it when not in use; hop in with no hassle when ready to paddle
• Inflatable work platform
• Designed with six or eight handles around the perimeter to help with boarding and boat tie downs
• Contains four D-rings for anchoring
• Quick to inflate and deflate using the dock's high volume H3 valve with an electric inflator or high-pressure.
• Recommended air pressure 10-12psi
• Includes nylon tote bag and double action hand pump with pressure gauge

Our custom made handle with two 4.5″ SeaSuckers is pull rated at over 200 lbs! That’s a lot of power. Use it as an extra hand-hold or grab bar, or use it like we do – as a carrying handle. The handle is made of 3/4″ white Starboard and has plenty of room to grab onto. The vacuum mounts have built-in finger pumps that allow you to attach or remove this handle in just seconds. Attaches to a wide range of surfaces – glass, fiberglass, metal, most plastics – to give you maximum utility.

All Seasucker products are subject to take 2-4 weeks if not in stock. 

Are you tired of your phone, snacks, drinks etc rolling around all over the dash while your'e running the boat? Drives me nuts! These are the answers. Finally a real cupholder and/or dry box that actually holds on with their patented design. Every boat should have one. The Sea Sucker mount is stronger than you would imagine. They are even used for roof rack mounts on cars!

Stick them anywhere on the bridge or in the cockpit on an sportfish boat or center console.

Are you tired of your phone, snacks, drinks etc rolling around all over the dash while your'e running the boat? Drives me nuts! These are the answer. Finally a real cupholder and/or dry box that actually holds on with their patented design. Every boat should have one.  The Sea Sucker mount is stronger than you would imagine. They are even used for roof rack mounts on cars!

Stick them anywhere on the bridge or in the cockpit on an sportfish boat or center console.

Are you tired of your phone, snacks, drinks etc rolling around all over the dash while your'e running the boat? Drives me nuts! These are the answer. Finally a real cupholder and/or dry box that actually holds on with their patented design. Every boat should have one.

The Sea Sucker mount is stronger than you would imagine. They are even used for roof rack mounts on cars!

Stick them anywhere on the bridge or in the cockpit on an sportfish boat or center console.

Are you tired of your phone, snacks, drinks etc rolling around all over the dash while your'e running the boat? Drives me nuts! These are the answer. Finally a real cupholder and/or dry box that actually holds on with their patented design. Every boat should have one.

Stick them anywhere on the bridge or in the cockpit on an sport fish boat or center console.

Our Pro Series rod holders are a step up from the base models they replace. They still mount when and where you need them and can be attached or removed in seconds, but with added functionality and style!

We've ditched the bulky aluminum track in favor of a sturdy HDPE base. The Pro Series rod holders have removable pins at the bottom - take it out (and store it in the slot on the base) for long-butt spinning reels, and leave it in for gimballed conventional rods. Great for attaching to a bait tank while rigging lines, or to the gunwale in the front of the boat where you don’t have built-in rod holders.

The Pro Series 3-Rod Holder has a staggered middle rod holder to keep reels and handles from bumping into each other. Comes with a single 6″ SeaSucker (pull rated to 210 lbs). * For storage & transportation only

Our Pro Series rod holders are a step up from the base models they replace. They still mount when and where you need them and can be attached or removed in seconds, but with added functionality and style!

We've ditched the bulky aluminum track in favor of a sturdy HDPE base. The Pro Series rod holders have removable pins at the bottom - take it out (and store it in the slot on the base) for long-butt spinning reels, and leave it in for gimballed conventional rods. Great for attaching to a bait tank while rigging lines, or to the gunwale in the front of the boat where you don’t have built-in rod holders.

Comes with a single 6″ SeaSucker (pull rated to 210 lbs). * For storage & transportation only

Our Pro Series rod holders are a step up from the base models they replace. They still mount when and where you need them and can be attached or removed in seconds, but with added functionality and style!

We've ditched the bulky aluminum track in favor of a sturdy HDPE base. The Pro Series rod holders have removable pins at the bottom - take it out (and store it in the slot on the base) for long-butt spinning reels, and leave it in for gimballed conventional rods. Great for attaching to a bait tank while rigging lines, or to the gunwale in the front of the boat where you don’t have built-in rod holders.

Comes with a single 6″ SeaSucker (pull rated to 210 lbs). * For storage & transportation only

If you need more space for stuff, this is the one for you. One large (24"x7.5") platform with two tumbler holders, and slots for knives, pliers, grips, etc. Clear acrylic held in place with two powerful SeaSucker vacuum mounts.

Two cup holders? Check. Knife slot? Check. Pliers slot? Check. Utility dish? Check. Hook holes? Check. What more can you ask for? Made of 3/4” white Starboard for durability, and attached to a 4 1/2” Sea Sucker for unparalleled holding power.

This little beauty is taking the place of our Tackle Bar and MultiStation – it’s like a marriage of the two. If you liked (or were looking for) one or both of those items, the Fisherman’s Cup Holder is for you.

Attaches to a vertical surface. Center dish measures 2 3/4″ across and 1 1/2″ deep. Cupholders are marine standard 3 1/2″ wide inserts.

What are SeaSuckers Anyway?